Cold Chamber Die Casting Machine RDC160
Cold Chamber Die Casting Machine RDC160
Spheroidal graphite cast iron mould board, high tensile alloy steel bar, and high-abrasive chromium plating.
Mould control under multi-level pressure and speed, intelligent mould protection against low pressure.
C-shaped or H-shaped crossbeam linked with pillar support to ensure high reliability and precision of material stamping.
Hydraulic gear-type adjusting device.
High-speed ejection and core pulling device.
| Item | Unit | RDC160 | ||
| Die Locking Force | KN | 1600 | ||
| Die Stroke | mm | 340 | ||
| Die Thickness(Min-Max) | mm | 150-550 | ||
| Die Dimension | mm | 677×726 | ||
| Tie-bar inner Spacing(V×H) | mm | 465×465 | ||
| Tie Bar Diameter | mm | 80 | ||
| Injection Force | KN | 226 | ||
| Plunger Stroke | mm | 370 | ||
| Plunger Tip Diameter | mm | 40 | 50 | 60 |
| Shot Weight(AL) | Kg(AL) | 0.9 | 1.3 | 2 |
| Shot Weight(Mg) | Kg(Mg) | — | — | — |
| Specific Pressure | Mpa | 180 | 115 | 80 |
| (40Mpa) Projecting Area |
c㎡ | 400 | ||
| Injection Port position | mm | 0,-80 | ||
| Injection Stoke | mm | 150 | ||
| Injection Stroke | mm | 110 | ||
| Over Height of Flange | mm | 12 | ||
| Ejection Force | KN | 110 | ||
| Ejection Length | mm | 85 | ||
| Hydraulic Pressure | Mpa | 14 | ||
| Electric Motor Capacity | KW | 15 | ||
| Volume of Oil | L | 450 | ||
| Machine Weight | ton | 6.8 | ||
Independent piston-type supercharger
Accumulator with two speed levels ensuring
Fast and stable injection.
Ruida specializes in producing “Ruida” brand cold chamber die casting machine, hot chamber die casting machine and its peripheral equipment, which are widely used in automobiles, motorcycles, electronics and communication. , gifts, toys and other fields. Read more
